4-Port Gigabit PoE Switch 65Watt
CA$68
Conform to IEEE802.3af/at PoE standards, the 4-port gigabit PoE switch transmits data and DC power on a single LAN cable. Quickly expand your 4G router network.
5x 1000Mbps Gigabit RJ45 ports
With 4x PoE(+) ports and 1x uplink port
65watt total power budget, each port max 30watt
IEEE802.3af/at PoE standards, output 48/52Volt
Unmanaged PoE switch, plug-and-play
EXPAND YOUR 4G ROUTER NETWORKS
POWER UP OUTDOOR ROUTER & LINK PoE AP, CAMERA, COMPUTER
PoE Switch
IEEE802.3af/at Standard PoE+ Switch
Support both 48V & 52Volt PoE Devices
65Watt power budget. Max 30W Each.
Gigabit Ports
5x 1000Mbps Gigabit RJ45 Ports
With 4xPoE and 1xUplink Ports
Speed up speed & reduce latency
Plug & Play
Unmanaged Switch Simple Set Up
No Software or Configuration Required
PD Detection & Overload Arrangement
Powered by high-performance QCA8337, the gigabit PoE switch could look up with 2048 MAC addresses and a four-traffic class QoS flow control.
Comes with palm size and fanless design, the PoE switch is completely noise-free when mounting on a wall or used on a desktop.
Comply with IEEE802.3az energy-efficient Ethernet mode. It is designed to optimize power usage and lower operating cost.
Operating Modes of the PoE Switch
The PoE switch has three selectable modes:
- Normal Mode – The default standard mode for typical operation. The PoE switch transmits data and power through all PoE LAN ports.
- Booster Mode – Extends the distance at which power can be carried over the LAN cable. This may lead to minor data packet loss. Applicable when sending only DC power without Ethernet to connected devices.
- VLAN Mode – Disables data communication through PoE LAN Ports 1-4, blocking internal traffic routing. This isolates connected devices from the network. Avoid enabling if your Outdoor Router links to the internet through one of these PoE ports.
Gigabit PoE Switch Specification
PoE Port | No. 1~4 Ports |
Uplink Port | No. 5 Port |
PoE Port Priority | Port 1 > 2 > 3 > 4 |
Transmission Rate | 10/100/1000Mbps |
Transmission Mode | Adaptive full/half-duplex |
MAC Table | 2048 |
Packet Forwarding | Rate 890kbps |
Packet Buffer | Memory 768Kb |
Indicator | Orange: PoE Power Green: Link / Act |
Lightning Protection | Common Mode 2KV Differential Mode 0.5KV |
Measurement | Switch: 110x75x23mm / 173gram Full-set: 193x132x80mm / 652gram |
Working Environment | Temperature: -10 ~ 45°C Celsius Humidity: 10% ~ 90% RH |
Storage Environment | Temperature: -20 ~ 70°C Celsius Humidity: 5% ~ 95% RH |
Power Supply | Input: 110-240V 50Hz Output: DC 52V 1.25A CE and UL approved |
Networking Protocol | IEEE802.3i 10 BASE-T IEEE802.3u 100 BASE-TX IEEE802.3ab 1000 BASE-T IEEE802.3x Flow Control IEEE802.3af/at Power over Ethernet IEEE802.3az EEE |
Be the first to review “4-Port Gigabit PoE Switch 65Watt” Cancel reply
You must be logged in to post a review.
Reviews
There are no reviews yet.