28
Aug
Firmware OpenWrt, Guidance EZR30 Series

Outdoor Router Command Line Interface

The outdoor router provides both the Web interface and the command-line interface. You can access the Web interface with a web browser.

The command-line interface (CLI) means interacting with the router system where the user issues command to the router system in the form of command lines. Secure Shell (SSH) is a cryptographic network protocol to access the router’s command-line interface.

[Local] Web Terminal

Available on firmware version EV3104 and later versions. Upgrade the firmware if you are using a legacy version firmware.

  • Log in the router admin, go to “System / Terminal”.
  • Input default router user name “root” and router password.
  • You will then receive the welcome message on the web terminal interface.

* The web terminal is unavailable under the Traversal Cloud mode. You can follow below remote SSH guidance to configure a remote SSH tunnel on the traversal cloud.

[Local] Linux & Mac

For Linux and Mac computers, the most common tool is Terminal.

  • Open a new Terminal window, type “ssh root@192.168.30.1” and press “Enter”.
  • If this is your first time logging in, you might be asked to clarify whether you really want to login. In that case, just type yes and press “Enter”.
  • Then type in the router’s admin password and press “Enter” to finish the login process.

[Local] Windows

For the Windows computer, the most common SSH tool is PuTTY. You can download it from here with free.

  • Launch PuTTY and select the SSH option under the “Connection type” field.
  • Type in the router’s LAN IP address (“192.168.30.1” by default) into the “Host Name” field.
  • Type in the SSH port into the “Port” field (“22” by default).
  • Click “Open”.
  • In the next window type in the login name (“root” by default), press “Enter”.
  • Type in the router’s admin password (“root” by default) and press “Enter” again.
  • You should be greeted with a message like the right side image shows.

Remote SSH

Remote SSH depends on Traversal Cloud provided with firmware version EV3104 or later versions. Upgrade the firmware if you are using a legacy version firmware.

  • Log in the router admin, go to “System / Administration”, and enable the checkbox of “Gateway ports”.You can change the SSH port.
  • Go to “Service / Traversal Cloud”, click the tab of “Rules”, then click the “Add” button to add an extra SSH proxy.
  • Configure the new proxy as the below parameters.
    Proxy Name: Use “SSH_Router-Serial-Number” (Must be unique!)
    Type: Choose TCP
    Local IP: Use 127.0.0.1
    Local Port: Default 22, same as the SSH port.
    Remote Port: Adjustable
    Privilege Mode: Must enable this checkbox.
  • Click the “Save & Apply” button.
  • Now you can access the router via remote SSH on an SSH tool.
    For example, enter “ssh -oPort=6222 root@ezr33.outdoorrouter.net”

Leave a Reply